Pipeline Protection Products, Underground Tapes,
Pipe Coatings, Pipe Tapes, Cathodic Protection, Safety Products.

 

Holloway Shunts

Agra Type JB

This is a 0.01 ohm, 8 ampere capacity manganin strip shunt designed for use in junction boxes. Size is 1/2" x 3-3/4". Standard hole size is for #10 (3/16") screws. Optional hole size for 1/4" screws is available. Hole spacing is 3-1/4".

   

Holloway Type RS

This 0.01 ohm shunt is rated at 6 amps and is made from #12 manganin wire. With a overall length of 5-3/4", the shunt can be bent to fit into small areas. The RS shunt is used for junction boxes, test stations and similar applications.

   

Holloway Type SO

This is a 0.001 ohm shunt is rated at 50 amps and is constructed of #4 manganin wire and 1/4" x 1/2" x 1-1/8" brass end plates for mounting. Mounting holes in the brass plates are made for 1/4"-20 screws and are on 3-3/8" centers. 10-32 screws are provided for permanent lead connections.

   

Holloway Type SS

This is a 0.001 ohm shunt is rated at 25 amps and is constructed of copper nickel alloy ribbon. Provided mounting holes are on 2-3/4" centers for a 3/8" bolt.10-32 screws are provided for permanent lead connections.

   

Holloway Type SW

This is a 50 millivolt panel shunt which can be ordered in a variety of amperage ratings up to 200 amp. Resistance varies according to amperage rating. Potential screws are #6. Holes are for 1/4" bolts and spacing is 2 1/2".

 
For immediate assistance, call 800 -WRAP-A-PIPE (800-972-7274)
Northtown Company - Manufacturer and Distributor of Pipeline Protection Products, Underground Tapes,
Pipe Coatings, Pipe Tapes, Cathodic Protection and Pipe Products
5202 Argosy Ave., Huntington Beach, CA 92649 - Phone: 714-897-0700 - Fax: 714-897-0600