KEYSITE 740

Registered Trademark Since 1945
EPOXY COATING

GENERAL FEATURES:

  • TWO-COMPONENT CATALYZED EPOXY
  • VERSATILE VALVE AND TANK LINING SYSTEM
  • EXCELLENT ABRASION RESISTANCE
  • HIGH IMPACT STRENGTH
  • SUPERIOR SALT WATER RESISTANCE
  • DURABLE FINISH
  • OUTSTANDING BOND STRENGTH
  • CALIFORNIA VOC COMPLIANT
  • CERTIFIED TO MEET NSF 61
Material Safety Data Sheet

 

PRODUCT DESCRIPTION: High solids, amine-cured epoxy formulated from the very finest ingredients. Its high build quality allows for a one coat application in many service conditions, over properly prepared surfaces. Excellent chemical and corrosion resistance in most water applications, corrosive fume service and where high impact and abrasion resistance is required.

PRINCIPAL USES: Steel vessels, pipes, pumps, valves, blowers, and structural weldments in many water, chemical, petroleum and marine environments.

OTHER FEATURES: KEYSITE 740 is a high solid VOC compliant epoxy, exceeding the most stringent air quality regulations. KEYSITE 740 contains is non flammable therefore, it can be applied with ease in areas where another epoxy system might create a fire concern.

KEYSITE 740 is easy to apply and if damaged can be readily repaired in the field.

KEYSITE 740 has the highest impact resistance and bond strength in new applications and when applied over properly prepared existing Keysite 740 linings.

KEYSITE 740 has excellent resistance to the following: Water (tap, fresh, salt, brackish, distilled, deionized, boiler feed to 180°F.), alcohol, alkalies, gasoline, diesel fuel, sour crude, mineral solvents, toluene, xylene, kerosene, and nonedible vegetable oils.

Northtown Company - 5202 Argosy Ave., Huntington Beach, CA 92649 - Phone: 714-897-0700 - Fax: 714-897-0600