3M DBY/DBR and DBY-6/DBR-6
Direct Bury Splice Kits

3M Has Your Wiring Needs Covered

3M DBY/DBR Direct Bury Splice Kits are real time savers when installing underground electrical systems. Every component for the splice is included in the kit. The insulator tube is pre-filled, eliminating the chance of the installer using too much or too little sealant.

No crimping tools, no waste, no mess. Just quick, reliable underground splices for irrigation and sprinkler systems, landscape lighting and other 30-volt underground projects. The splice may be re-entered without cutting the wires (new tube required).

FLEXIBILITY

  • The DBY and DBY-6 splice kit connects a wire range of 2-5 #18 AWG through 2 #12 plus 1 #16 AWG solid or stranded copper wire.
  • The DBR and DBR-6 splice kit connects a wire range of 5 #16 AWG through 3 #10 AWG solid or stranded copper wire.
  • Sealant does not set up hard, allowing splice to be reworked without cutting wires (new tube required).
  • Application temperature range: 32 – 120 F (0 – 49 C).
  • Storage Temperature: 120 F (49 C) maximum.
 ECONOMY
  • Insulating gel is already contained in the tube.
  • Long-term electrical properties reduce callbacks and rework.

DEPENDABILITY

  • Locking fingers in the tube ensure that the Scotchlok™ connector stays in position.
  • The closed tube cover provides strain relief.
  • Design protects against corrosion failure.

The Scotchllok™ Y and R connectors are UL listed. When assembled in the tubes of the DBY-6 and DBR-6 products, the splices are UL listed for 600 volts maximum as a wire connector system for use with underground conductors.

Product
Wire Range
Agency Listing
DBY
18-12 AWG

-
DBR
16-10 AWG
-
DBY-6
18-14 AWG
UL, CSA
DBR-6
16-10 AWG
UL, CSA

For Use in:

  • Sprinkler Systems
  • Outdoor Lighting (Decks, driveways, lamp posts, landscape)
  • Septic Systems
  • Golf Courses
  • Other underground electrical wiring applications

 
| Pipe Protection | Pipeline Accessories | Coatings& Mastics | Cathodic Protection |
| Geotextiles | Tools | Tapes | Safety Products | Warehouse Supplies |
| Home | SDS/Spec Sheet | Services | Contact |
For immediate assistance, call 800 -WRAP-A-PIPE (800-972-7274)
Northtown Company - Manufacturer and Distributor of Pipeline Protection Products, Underground Tapes,
Pipe Coatings, Pipe Tapes, Cathodic Protection and Pipe Products
5202 Argosy Ave., Huntington Beach, CA 92649 - Phone: 714-897-0700 - Fax: 714-897-0600